Plascon Two-pack Polyurethane Clear Varnish With Hardener 3l

PRODUCT DESCRIPTION AND USES Plascon Two-Pack Polyurethane Clear Varnish is a high performance
two component polyurethane clear varnish for use on wooden
surfaces such as furniture, parquet floor, doors, etc. It provides a
durable finish with good chemical and abrasion resistance and good
flexibility. The product has long pot-life (8 hours) and is a high build
type (high solids).
SURFACE PREPARATION Timber surfaces to be varnished must be clean, dry and free from
any contaminants i.e. grease, oil, wax etc.
FINISH Clear glossy (Matt / Eggshell finishes available on request).
APPLICATION The product can be applied by conventional spray gun or brush, dip
coating and roller coating. Being a high build product three coats
are sufficient to give a high gloss finish. Sanding in between coats is
recommended.
THINNING AND MIXING Mix 3 parts by volume of Plascon Two-Pack Polyurethane Clear
Varnish with 1 part by volume of Plascon Two-Pack Polyurethane
Hardener. Thin down with Plascon Two-Pack Polyurethane Thinner
to suitable application viscosity. Allow to stand for 20 minutes
before use.
EQUIPMENT CLEANING Clean the equipment immediately after use with Plascon Two-Pack
Polyurethane Thinner.
DRYING TIME Surface dry within two hours, hard dry after 24 hours. Sandable and
recoatable after 12 hours when the product is hard dry.
COLOUR RANGE Clear
SPREADING CAPACITY 12-16 square metres @40 microns DFT (depending on the porosity
of the wood).
SOLIDS CONTENT 60% (mixture of varnish and hardener)