Plascon Stone Guard 4kg

PRODUCT DESCRIPTION:                Plascon Stoneguard is an acrylic based clear lacquer specially formulated for application to Stone, brick and concrete surfaces, to give a silky protective surface.

SURFACE PREPARATION:                Clean the stone work well with stiff fibre or nylon brush to remove all loose materials. Ensure the Surface is completely dry.

APPLICATION:                        Apply by brush

THINNING AND MIXING:                Thin with water. Mix in the ratio Stoneguard one part to two parts water. On smooth surfaces thin the product 1:1 with water before use.

FINISH:                             Low sheen

EQUIPMENT CLEANING:                 Use water for cleaning

DRYING TIME:                        Dries in one hour. Re-coatable in

4 hours.

COLOUR RANGE:                       Milky when wet but transparent when dry.

SPREADING CAPACITY:                 Depending on surface porosity and texture Approx. 10-12 square metres/litre on smooth plaster. Coverage will be greatly reduced when applied on porous or textured surfaces.

PACK SIZE:                          1 litre, 4litres, 20 litres

1. NB. Stone guard should not be used on the