Plascon Road Marking 4l Black/yellow/white

PRODUCT DESCRIPTION AND USES
Plascon Road Marking Paint has been formulated
with a special synthetic alkyd binders and
Chlorinated Rubber Resin which dry rapidly and
gives maximum resistance to wear and weather.
Plascon Road Marking Paint is manufactured
especially for the painting of traffic lines for
highways,streets, airports, factories, parking
lots, playgrounds, etc. It is also an excellent
binder for beads, which may be easily added to
the marking strip immediately after the traffic
paint is applied. It is quick drying. The drying
time varies from 5-15 minutes, depending on
weather conditions and thickness of the applied
layer.
Plascon Road Marking Paint provides a tough film
with excellent adhesion to stone, asphalt, and
concrete etc. Plascon Road Marking Paint is
recommended where the drying time is considered
very important – i.e. especially on roads that
carry heavy traffic and where a rapid drying time
is required.
SURFACE PREPARATION The surface must be clean and dry, free from any
loosely or loose bound materials.
FINISH Matt
APPLICATION By brush or machine
THINNING AND MIXING Plascon Road Marking Paint Thinner
EQUIPMENT CLEANING The equipment should be cleaned with Plascon Road
Marking Thinner.
DRYING TIME 5-15 minutes.