11 May
Construction

A&D STORE PALEAH TRADE AND HARDWARE

The top wholesaler and transporter of cement in Kenya is A&D STORE PALEAH TRADE AND HARDWARE. We provide all brands of cement, including but not limited to Bamburi cement, Mombasa cement, and National Cement East Africa, in wholesale and retail quantities. Savannah Cement Portland Cement.

To your preferred point of delivery or construction site, we deliver all of our orders across the nation.

In order to give you the lowest pricing on the market, we have linked directly with the manufacturers. In addition, we provide transport and logistics to the location of your choice.

11 May
Construction

Main difference between PPR male and female adapters

PPR (Polypropylene Random Copolymer) male and female adapters are fittings that are used to connect PPR pipes together. The main difference between the male and female adapters is their shape and how they connect to the pipe.

A male adapter has a threaded end that is inserted into the end of a PPR pipe. The threads on the adapter allow it to be screwed into the pipe, creating a tight seal. The other end of the adapter is smooth and designed to connect to another PPR fitting, such as a female adapter or a valve.

A female adapter, on the other hand, has a smooth end that is inserted into the end of a PPR pipe. The other end of the adapter has internal threads that allow it to be screwed onto a male threaded fitting, such as a male adapter or a valve.

So the main difference between the two types of adapters is the direction of the threads and how they connect to the pipe. Male adapters have external threads that connect to the inside of the pipe, while female adapters have internal threads that connect to the outside of the pipe. It’s important to select the correct type of adapter for your application to ensure a proper and leak-free connection.

11 May
Construction

CHAIN LINK PRODUCTION IN AFRICA

Chain link manufacturing involves the production of chain link fences, which are made of interlocking steel wires. The manufacturing process typically includes the following steps:

  1. Wire drawing: The first step in the manufacturing process is wire drawing. This involves pulling steel wire through a die to create the desired thickness and shape of wire. The wire may be galvanized or coated with a protective material to prevent corrosion.
  2. Weaving: The wires are then woven together to create the chain link mesh. This is done using a machine that interlocks the wires at right angles to each other, forming a diamond-shaped pattern. The size of the diamond-shaped holes can be customized to suit different needs.
  3. Rolling: Once the chain link mesh is woven, it is rolled up into large rolls for storage and transportation.
  4. Fabrication: The chain link mesh is then cut to size and fitted with various accessories such as posts, rails, and fittings. The accessories can be made of various materials, such as steel or aluminum, depending on the application and environment.
  5. Galvanizing: Some chain link products may also be hot-dip galvanized for additional corrosion protection. This involves dipping the finished product into a bath of molten zinc, which forms a protective layer on the surface of the steel.
  6. Coating: Alternatively, the chain link products may be coated with a layer of PVC or other protective material to enhance their durability and appearance.

Overall, chain link manufacturing is a multi-step process that involves wire drawing, weaving, rolling, fabrication, and finishing. The end result is a durable and versatile fencing material that can be used in a variety of applications.

11 May
Construction

Best quality DAMP PROOF MEMBRANE

A damp proof membrane (DPM) is a layer of material that is applied to a surface to prevent moisture from passing through. DPMs are commonly used in construction to protect buildings from moisture damage. Here are some of the common uses of damp proof membranes:

  1. Foundations: DPMs are often used in the construction of building foundations to prevent moisture from entering the structure. The membrane is typically placed between the foundation wall and the ground to prevent water from seeping into the basement or crawl space.
  2. Floors: DPMs can also be used as a moisture barrier under concrete floors. This helps to prevent moisture from seeping through the concrete and into the building.
  3. Walls: DPMs can be applied to the walls of a building to prevent moisture from seeping in through the masonry or brickwork.
  4. Roofs: DPMs are commonly used as a waterproofing layer for flat roofs. They are also used to prevent moisture from entering through roof penetrations, such as vents or chimneys.
  5. Basements: DPMs are often used to waterproof the walls and floors of basements to prevent moisture from seeping in. This helps to prevent mold and mildew growth and protects the building’s foundation.

Overall, the use of a damp proof membrane is essential in preventing moisture damage to buildings and ensuring their long-term durability.

The installation procedure for a damp proof membrane (DPM) may vary depending on the specific application, but here are the general steps to follow:

  1. Surface preparation: The surface where the DPM will be installed should be clean, dry, and free of any debris or loose materials. Any cracks or defects should be repaired before installation.
  2. Cut the DPM to size: Measure the area where the DPM will be installed and cut the membrane to the appropriate size. It should be cut slightly larger than the area it will cover to allow for overlapping.
  3. Lay the DPM: Place the DPM onto the surface to be covered and smooth it out, removing any wrinkles or bubbles. If multiple sheets are required, overlap the edges by at least 150mm and seal them using tape or adhesive.
  4. Fixing the DPM: The DPM should be fixed to the surface using adhesive or mechanical fixings such as nails or staples. The fixing method will depend on the type of surface and the specific application.
  5. Protection and Covering: Once the DPM is installed, it should be protected from damage during the construction process. For example, it may be covered with a protective layer of insulation or concrete.
  6. Testing: Before proceeding with any further construction, the DPM should be tested to ensure that it has been installed correctly and that it is functioning properly. This may involve checking for leaks or using a moisture meter to verify that the surface is dry.

It is important to follow the manufacturer’s instructions and to consult with a professional if you are unsure about the installation process.

11 May
Construction

Simba cement from National cement

At National Cement, we produce Simba cement and paving blocks of the greatest quality and offer them to customers across the entire nation. A National Cement Company Limited (NCCL) product guarantees proven exceptional performance, dependable quality, and simple accessibility to be a beloved brand throughout the country. We are extremely proud of our Kenyan heritage and work hard to provide the greatest cement products in the nation by utilizing cutting-edge technology. This keeps us one step ahead of the competition and helps us maintain some of the top worldwide standards for decades to come. Our premium paver blocks feature short installation times along with stunning appearances. They are affordable, strong, and come in a huge selection of hues, patterns, and finishes to precisely match your space.Available at Paleah.

10 May
Construction

HOW TO BUILD WITH GLASS BLOCKS AVAILABLE

Glass blocks, also known as glass bricks, are a type of building material that is commonly used in construction. They are typically made from two separate pieces of glass that are fused together with a special sealant, leaving a hollow space in between. Glass blocks come in a variety of shapes, sizes, colors, and patterns, which can be used to create unique and attractive architectural features.

One of the main uses of glass blocks in construction is for natural lighting and privacy. Glass blocks can be used to create walls, partitions, skylights, and windows that allow natural light to enter while maintaining privacy. They are commonly used in bathrooms, basements, stairwells, and other areas where privacy and natural light are desired.

Glass blocks are also used for their insulating properties. They can be used as an alternative to traditional brick or concrete blocks to create walls that provide better thermal insulation and soundproofing.

In addition, glass blocks can be used to create decorative features such as patterns, mosaics, and murals. They can also be used to create curved walls and other custom designs, making them a versatile and attractive building material.

Installing glass blocks in construction requires special skills and techniques to ensure a proper seal and secure fit. It is important to hire a professional installer or contractor with experience in glass block installation to ensure a safe and long-lasting installation.

Sealing and fitting glass blocks in construction requires some specialized skills and techniques. Here is a general guide on how to seal and fit glass blocks:

  1. Plan the layout: Plan the layout of the glass blocks, including the size, pattern, and location. Measure and mark the area where the glass blocks will be installed.
  2. Prepare the surface: Clean and prepare the surface where the glass blocks will be installed. Make sure the surface is dry, level, and free of dust and debris.
  3. Apply sealant: Apply a bead of sealant along the edges of the first row of glass blocks. The sealant should be applied evenly and smoothly.
  4. Insert the glass blocks: Place the glass blocks into the sealant, making sure they are level and aligned with each other. Use spacers to ensure consistent spacing between the blocks.
  5. Apply more sealant: Apply more sealant along the edges of the first row of glass blocks, making sure to fill any gaps or voids.
  6. Repeat the process: Repeat the process for the next row of glass blocks, making sure to stagger the joints for maximum strength and stability. Use a level to ensure each row is straight and level.
  7. Remove excess sealant: Use a tool to remove any excess sealant and to smooth out the joints between the glass blocks.
  8. Allow to dry: Allow the sealant to dry completely before removing the spacers and continuing with the construction.

It is important to note that the exact process for sealing and fitting glass blocks may vary depending on the specific project requirements and the type of sealant being used. It is recommended to consult with a professional glass block installer or contractor for specific advice and guidance.