Duracoat Vinyl Matt emulsion Deluxe Internal or external walls of buildings. DuraCoat Vinyl Matt Emulsion is suitable for new and previously painted surfaces on cement plaster, brick, ceilings, hardboards, softboards etc.
Finish: Matt
Application: By brush, roller or spray
Thinning:
DURACOAT VINYL MATT DELUXE is recommended that clean water be used to thin to facilitate brushing, good flow and eliminate brush marks. The first coat which is usually regarded as a sealer should be thinned slightly more than subsequent coats.
Drying time: Tough Dry: 10-15 mins
Re coating: 1-2 hours
Cleaning:
Clean all equipment with water
Colour Range:
Available in a wide range of colours from DuraCoat Colour cards and DuraCoat Classic Fan Deck.
Spread Rate:
The spread rate varies considerably depending on the texture, porosity of the surface being painted. The approximate spread varies as follows:
Types of Surfaces New or Unpainted Previously Painted
Smooth Plater 14-16 m2/litre 15-17 m2/litre
Wood float Plater 11-13 m2/litre 12-14 m2/litre
Rough Cast 5-7 m2/litre 5-8 m2/litre
Pack Sizes: 1 litre, 4 litre, 20 litre
Reviews
There are no reviews yet.